+604-5024898    info@kfoil.com.my

INSULATION FOIL

AllINSULATION FOIL
K Innovation offer a wide range of Sisalation Aluminium Foil / Reflective Insulation / Radiant Barrier / Attic Foil / Vapour Barrier for the building and industrial insulation purposes. It can be either single or double sided insulation material. We welcome customize size to suit your need with MOQ and within our manufacturing range. Aluminium Foil Insulation reflect up to 95% of heat remaining low emissivity value (0.05) which significantly reduce heat transfer by radiant. It serve as a passive cooling technique in conjunction with insulation.

With the result of :
Cost down of the electric bill on the cooling or heating effects for wall, floor and roof insulation.
Comfortable environment with less energy consumption for building insulation, HVAC wrapping.
Eliminate condensation within the ceilings, walls and floors when properly installed as a vapour barrier.
Protect heat sensitive commodity by wrapping or packing with insulation foil.
Retain the temperature of the heated pipe / duct etc.
Fire Retardant Insulation Foil (BS476 PART 6 & 7) (3) View More


Fire Retardant Insulation Foil commonly be used as wrapping material for HVAC Ducting, Roofing, Wall, Floor, and etc.
 

 
 BS476 Part 6 : Fire Propagation Test This measure the amount of heat released when the product under test is burned
BS476 Part 7: Surface Spread of Flame Test Method of test to determine the classification of the surface spread of flame of products. Class 1 is the best rating
To achieve Class “0” a product must achieve Class 1 in the Part 7 test and also past Part 6 test.
Test done under this group of product is ISO 8301, MS ISO08302; ASTM C 1371; AS/NZS 4201.1; AS/NZS 4201.3; AS/NZS 1301.448s; AS/NZS 1301.423rp and TAPPI T470
 




99%Pure Aluminum Foil with high reflectivity (>0.98) and low emissivity (<0.02) surface
Comply with fire properties accordingtothestandardBS476Part6&7
Reinforced with bidirectional fiberglass scrim or polyester yarn for better tearing resistance, higher tensile strength and assist on mechanical strength.
Special bonding layer combined with aluminum foil giving it superior Vapor Barrier and Fire Retardant properties
Suggested size:
 


 Width (m) Length (m) Optimum pallet packing
1.22 –1.25 ±1% 60 ±1% 100 Rolls
Customize size available upon request, subject to material availability & machine’s capacity





  APRA K731 APRA K431 APRA K722
DESCRIPTION Fire Retardant Double Sided Reflective Aluminum Paper Foil, 8X8 Fiberglass Scrim Reinforced Fire Retardant Double Sided Reflective Aluminum Paper Foil, 16X8 Fiberglass Scrim Reinforced Fire Retardant Double Sided Reflective Aluminum Paper Foil, Polyester Yarn Reinforced
 
GRAMMAGE 150 –180 gsm
 		 150 –180 gsm 150 –180 gsm
THICKNESS 200 –250 microns
 		 200 –250 microns 200 –250 microns
THERMAL RESISTANCE
(ISO 8301, MS ISO8302)
 		 ~ 1.375 m²K/w ~ 1.282 m²K/w ~ 1.335 m²K/w
REFLECTIVITY
(ASTM C 1371)
 		 0.98
 		 0.98 0.98
EMISSIVITY
(ASTM C 1371)
 		 0.02 0.02 0.02
LAYOUT DIAGRAM
 
 



Heat insulation industrial material
HVAC duct insulation
Building wrapping
Cold room installation
Thermal tank
Wall insulation
Sauna room




               

APRA K731

APRA K431

APRA K722

 
 
Foil Scrim Kraft (FSK) (2) View More


Two way foil scrim kraft (FSK), reinforced with bidirectional fiberglass scrim
 




99% Pure Aluminum Foil with high reflectivity (>0.98) and low emissivity (<0.02) surface
Reinforced with bidirectional fiberglass scrim to increase the mechanical product strength and durability
Suggested size:
 
Width (m) Length (m) Optimum pallet packing
1.22 –1.25 ±1% 60 ±1% 120 Rolls
Customize size available upon request, subject to material availability & machine’s capacity.




  K730A K430A
DESCRIPTION Foil Scrim Kraft Single Sided Reflective Aluminum Paper Foil, 8x8 Fiberglass Scrim Reinforced Foil Scrim Kraft Single Sided Reflective Aluminum Paper Foil, 16x8 Fiberglass Scrim Reinforced
GRAMMAGE 115 –125 gsm 115 –125 gsm
THICKNESS 180 –280 micron 180 –280 micron
TENSILE STRENGHT
(ASTM D 828)		 MD: 5 –7 kN/m
XD: 5 –7 kN/m		 MD: 6–8 kN/m
XD: 5 –7 kN/m
TEAR RESISTANCE Good Good
VAPOUR BARRIER Good Good
CORROSION
(95% RH @50⁰C,30 DAYS)		 None None
REINFORCEMENT Fiberglass Scrim
(8x8 threads /100mm)		 Fiberglass Scrim
(16x8 threads /100mm)
LAYOUT DIAGRAM
 



Foil facing to bulk installation
Foil backing for mineral wool
Backing Material PU Foam
Building wrapping
Wall insulation
Concrete / Clay title roofing
Metal roofing




                                                       

Single Sided Reflective Aluminium Paper Foil, 8x8 Fiberglass Scrim Reinforced (K730A)

Single Sided Reflective Aluminium Paper Foil, 16x8 Fiberglass Scrim Reinforced (K430A)

  
  
Paper Foil (Double Sided) (4) View More


Double layer reflective surface for durable insulation performance
Further reinforcement with polyester yarn or fiberglass scrim to assist on product mechanical strength
 


99% Pure Aluminum Foil with high reflectivity (>0.98) and low emissivity (<0.02) surface (K720 ; K726)
Metalized Film (high optical density) with high reflectivity (>0.75 - 0.95) and low emissivity (<0.05 - 0.25) surface. (K620 ; K726 ; K736M)
Metalize film with better tear resistance for rough work, higher water or vapor permeability and tensile strength
Reinforced with one direction polyester yarn or bidirectional fiber glass scrim for better tearing resistant and higher tensile strength
Suggested size:
 

 Product Width (m) Length (m) Optimum pallet packing
K620; K720; K726 1.22 –12.5 ±1% 60 ±1% 130 Rolls
K736M 1.22 –12.5 ±1% 60 ±1% 120 Rolls
Customize size available upon request, subject to material availability & machine’s capacity




  K620 K720 K726 K736M
DESCRIPTION Double Sided Reflective Metalized Paper Film, Polyester Yarn Reinforced
 		 Double Sided Reflective Aluminium Paper Foil, Polyester Yarn Reinforced Double Sided Reflective Aluminium Paper Foil/Film, Polyester Yarn Reinforced Double Sided Reflective Metalize Paper Film, 8x8 Fiberglass Scrim Reinforced
GRAMMAGE 95 –115 gsm
 		 110 –120 gsm 105 –115 gsm 105 –115 gsm
THICKNESS
 		 130 –180 micron 120 –170 micron 125 –175 micron 175 –275 micron
TENSILE STRENGHT
(ASTM D 828)
 		 MD: 11–12 kN/m
XD: 9 –10 kN/m		 MD: 6 –7 kN/m
XD: 4 –5 kN/m		 MD: 7 –9 kN/m
XD: 5-7 kN/m		 MD: 8 –10 kN/m
XD: 6 –8 kN/m
PERMEABILITY
(ASTM E96-80)
 		 Max -0.01 g/h/m² Max -0.01 g/h/m² Max -0.01 g/h/m² Max -0.01 g/h/m²
CORROSION
(95% RH @50⁰C,30 DAYS)
 		 None None None None
DELAMINATION
(95% RH @50⁰C,30 DAYS)
 		 None None None None
TEAR RESISTANCE
 		 Excellent Good Excellent Excellent
VAPOUR BARRIER
 		 Excellent Excellent Excellent Excellent
REINFORCEMENT Polyester Yarn
(Single Direction)
 		 Polyester Yarn
(Single Direction)
 		 Polyester Yarn
(Single Direction) 		Fiberglass Scrim
(8x8 threads / 100mm)
LAYOUT DIAGRAM
 


Foil facing to bulk installation
Foil backing for mineral wool
 Backing material PU foam
 Building wrapping
 Wall insulation
 Concrete / Clay title roofing
 Metal roofing





Double Sided Reflective Metalized Paper Film, Polyester Yarn Reinforced (K620)

Double Sided Reflective Aluminium Paper Foil, Polyester Yarn Reinforced (K720)

Double Sided Reflective Aluminium Paper Foil-Film, Polyester Yarn Reinforced (K726)

Double Sided Reflective Metalized Paper Film,8x8 Fiberglass Scrim Reinforced (K736M)

Paper Foil (Single Sided) (2) View More


Foil Yarn Kraft (FYK) one way reinforcement paper foil with better tearing strength.
 




99% Pure Aluminum Foil with high reflectivity (>0.98) and low emissivity (<0.02) surface (K710)
Metalized Film (high optical density)with high reflectivity (>0.75-0.95)and low emissivity (<0.05-0.25) surface (K610)
Metalize film with better tear resistance for rough work, higher water or vapor permeability and tensile strength
Reinforced with one direction polyester yarn to increase the mechanical product strength and durability
Suggested size:
 


 Width (m) Length (m) Optimum pallet packing
1.22 –1.25 ±1% 60±1% 130 Rolls
Customize size available upon request, subject to material availability and machine’s capacity




  K610 K710
DESCRIPTION Single Sided Reflective Metalized Paper Film, Polyester Yarn Reinforced
 		 Single Sided Reflective Aluminum Paper Foil, Polyester Yarn Reinforced
GRAMMAGE 80 –100 gsm
 		 85 –100 gsm
THICKNESS 120 –170 micron
 		 115 –165 micron
TENSILE STRENGHT
(ASTM D 828)		 MD: 7–8 kN/m
XD: 5 –6 kN/m
 		 MD: 5–6 kN/m
XD: 3 –4 kN/m
PERMEABILITY
(ASTM E96-80)
 		 Max -0.03 g/h/m² Max -0.03 g/h/m²
CORROSION
(95% RH @50⁰C,30 DAYS)
 		 None None
DELAMINATION
(95% RH @50⁰C,30 DAYS)
 		 None None
REINFORCEMENT Polyester Yarn
(Single Direction)
 		 Polyester Yarn
(Single Direction)
LAYOUT DIAGRAM
 


Foil facing to bulk installation
Foil backing for mineral wool
Backing material PU foam
Building wrapping
Wall insulation
Concrete / Clay title roofing
Metal roofing




 
 

Single Sided Reflective Metalized Paper Film, Polyester Yarn Reinforced (K610)

Single Sided Reflective Aluminium Paper Foil, Polyester Yarn Reinforced (K710)

  
  
Radiant Barrier (MS2095) CIDB SIRIM BOMBA (CLASS 0) (3) View More

Radiant Barrier / Reflective Insulation / Vapor Barrier are known to be premium quality and is extensive used in various industries like Construction, Packaging and etc.

They can be used as wrapping material for HVAC Ducting, Roofing, Wall, Floor, and etc
 


MS2095 is standard compliance according to the Department of Standards Malaysia
Declaration of standard that have been announce on October 2014 is referring to the building materials that comply with radiant barrier and reflective insulation building materials specification.
This standard also listed under fourth schedule of standard for certification construction material by  Construction Industry Development Board (CIDB) Malaysia
 



BS476 Part 6 : Fire Propagation Test
This measure the amount of heat released when the product under test is burned
BS476 Part 7: Surface Spread of Flame Test
Method of test to determine the classification of the surface spread of flame of products. Class 1 is the best rating
To achieve Class “0” a product must achieve Class 1 in the Part 7 test and also past Part 6 test.
Test done under this group of product is ISO 8301, MS ISO08302; ASTM C 1371; AS/NZS 4201.1; AS/NZS 4201.3; AS/NZS 1301.448s; AS/NZS 1301.423rp, TAPPI T470  and ASTM D1004
 


99% Pure Aluminum Foil with high reflectivity (>0.98) and low emissivity (<0.02) surface
Comply with fire properties according to the standard BS476 Part 6 & 7
Reinforced with  high quality woven fabric or bidirectional fiberglass scrim for better tearing resistance, higher tensile strength and assist on mechanical strength.
Special bonding layer combined with aluminum foil giving it superior Vapor Barrier and Fire Retardant properties
Suggested size:
 
 Product Width (m) Length (m) Optimum pallet packing
MS APRA K731
MS APRA K431
MS APRA K531
MS APRA K831		 1.25 ±1% 60 ±1% 100 Rolls
MS AWA K750 1.25 ±1% 60 ±1% 110 Rolls
Customize size available upon request, subject to material availability & machine’s capacity




  MS AWA K750 MS APRA K731 MS APRA K431
DESCRIPTION Fire Retardant Double Sided Reflective Aluminum Woven Foil Fire Retardant Double Sided Reflective Aluminum Paper Foil, 8X8 Fiberglass Scrim Reinforced
 		 Fire Retardant Double Sided Reflective Aluminum Paper Foil, 16X8 Fiberglass Scrim Reinforced
GRAMMAGE
 		 130 –150 gsm 165 –220 gsm 165 –220 gsm
THICKNESS
 		 130 –180 microns 230 –300 microns 230 –300 microns
THERMAL RESISTANCE
(ISO 8301, MS ISO8302)
 		 ~ 1.212 m²K/w ~ 1.375 m²K/w ~ 1.375 m²K/w
REFLECTIVITY
(ASTM C 1371)
 		 0.98 0.98 0.98
EMISSIVITY
(ASTM C 1371)
 		 0.02 0.02 0.02
RESISTANCE TO DRY LAMINATION
(AS/NZS 4201.1)
 		 No Delamination No Delamination No Delamination
RESISTANCE TO WET LAMINATION
(AS/NZS 4201.1)
 		 No Delamination No Delamination No Delamination
SHRINKAGE
(AS/NZS 4201.3)		 MD: < 0.5%
CD: < 0.5%
 		 MD: < 0.5%
CD: < 0.5%		 MD: < 0.5%
CD: < 0.5%
TENSILE STRENGTH
(AS/NZS 1301.448s)		 MD: > 7.5 to < 9.5kN/m
CD: > 7.5to < 9.5 kN/m
 		 MD: > 5 kN/m
CD: > 3 kN/m		 MD: > 5 kN/m
CD: > 3 kN/m
EDGE TEAR RESISTANCE
(TAPPI T470)		 MD: > 200 N
CD: > 240 N
 		 MD: > 30 N
CD: > 20 N		 MD: > 30 N
CD: > 20 N
VAPOUR BARRIER
(ASTM E96)
 		 0.002 -0.14μg/N.s
> 7 to < 450MN.s/g		 0.002 –0.14 μg/N.s 0.002 –0.14 μg/N.s
SURFACE WATER ABSORBENCY
(AS/NZS 4201.6)
 		 - > 100 g/m² > 100 g/m²
INITIAL TEAR  RESISTANCE
(ASTM D1004)
 		 MD: 45 –60 N
CD: 45 –60 N		 - -
FOLDING ENDURANCE
(AS/NZS 1301.423rp)		 - MD: > 2.00 log₁₀ 100
CD: > 1.70log₁₀ 50		 MD: > 2.00 log₁₀ 100
CD: > 1.70 log₁₀ 50
 
LAYOUT DIAGRAM  

 


Heat insulation industrial material
HVAC duct insulation
Building wrapping
Cold room installation
Thermal tank
Wall insulation
Sauna room 
    



 

MS AWA K750

MS APRA K731

MS APRA K431

 
 
Single Sided Paper Foil (2) View More


We offer insulation foil with paper backed.
 



99%Pure Aluminum Foil with high reflectivity (>0.98) and low emissivity (<0.02) surface (K710N)
Metalized Film (high optical density) with high reflectivity (>0.75-0.95)and low emissivity (<0.05-0.25) surface (K610N)
Metalize film with better tear resistance for rough work, higher water or vapor permeability and tensile strength
Coupling with minimum 10mm of air space can cut down heat transfer by conduction and convection.
Suggested size
 

 Width (m) Length (m) Optimum pallet packing
1.22 –1.25 ±1% 60 ±1% 130 Rolls
Customize size available upon request, subject to material availability and machine’s limitation.




  K610N K710N
DESCRIPTION Single Sided Reflective Metalized Paper Film Single Sided Reflective Aluminum Paper Foil
GRAMMAGE
 		 75 –95 gsm 85 –95 gsm
THICKNESS
 		 115 –165 microns 110 –160 microns
TENSILE STRENGHT
(ASTM D 828)
 		 MD: 5–6 kN/m
XD: 3 –4 kN/m		 MD: 4–5 kN/m
XD: 2 –3 kN/m
PERMEABILITY
(ASTM E96-80)
 		 Max -0.03 g/h/m² Max -0.03 g/h/m²
CORROSION
(95% RH @50⁰C,30 DAYS)
 		 None None
DELAMINATION
(95% RH @50⁰C,30 DAYS)
 		 None None
REINFORCEMENT
 		 None None
LAYOUT DIAGRAM
 


Foil facing to bulk installation
Foil backing for mineral wool
Backing material PU foam
Building wrapping
Wall insulation
Concrete / Clay title roofing
Metal roofing




 
 

Single Sided Reflective Aluminium Paper Foil (K610N)

Single Sided Reflective Aluminium Paper Foil (K710N)

  
  
Sound Dampening Insulation Backing (3) View More


For this series, we offer 3 models of choice to cater from Medium to Extra Heavy Duty application.

All K Foil Perforated Series models are reinforced with special fiberglass scrim for better product strength.
 




99% Pure Aluminum Foil with high reflectivity (>0.98) and low emissivity (<0.02) surface (K731P ; K431P)
Metalized Film ( high optical density ) with high reflectivity (>0.75 - 0.95) and low emissivity (<0.05 - 0.25) surface (K631P)
Metalize film with better tear resistance for rough work, higher water or vapor permeability and tensile strength
K731P is made to cater the Light Duty application, K431P made to cater the Heavy Duty application meanwhile K631P is light weight yet suitable for Extra Heavy Duty application with high tear and tensile strength.
To reduce the risk of continuous tear off and to avoid glass wool from passing through, this series have been perforated with small openings (2.55mmdiameter) of diamond shape perforation.
Reinforced with bidirectional fiberglass scrim for better tearing resistance and higher tensile strength
Suggested size:
 
 Product Width (m) Length (m) Optimum pallet packing
K731P; K631P 1.22 –1.25 ±1% 60 ±1% 100 Rolls
K431P 1.22 –1.25 ±1% 60 ±1% 90 Rolls
Customize size available upon request, subject to material availability & machine’s capacity




  K731P K431P K631P
DESCRIPTION Double Sided Perforated Aluminum Paper Foil, 8x8 Fiberglass Scrim Reinforced
 		 Double Sided Perforated 8 Layers Aluminum Paper Foil, 8x8 Fiberglass Scrim Reinforced
 		 Double Sided Perforated Metallize Paper Film, 8x8 Fiberglass Scrim Reinforced
GRAMMAGE
 		 120 –140 gsm 190 –210 gsm 90 –100 gsm
THICKNESS
 		 190 –290 micron 305 –405 micron 175 –275 micron
CORROSION
(95% RH @50⁰C,30 DAYS)
 		 None None None
DELAMINATION
(95% RH @50⁰C,30 DAYS)
 		 None None None
REINFORCEMENT Fiberglass Scrim
(8x8 threads /100mm)		 Fiberglass Scrim
(8x8 threads /100mm)		 Fiberglass Scrim
(8x8 threads /100mm)
 
LAYOUT DIAGRAM
 



ACMV Duct Internal Linear
Sound Dampening Insulation Backing




 

Double Sided Perforated Reflective Metalize Paper Film, 8x8 Fiberglass Scrim Reinforced (K631P)

Double Sided Perforated 8 Layers Reflective Aluminium Paper Foil, 8x8 Fiberglass Scrim Reinforced (K431P)

Double Sided Perforated Reflective Aluminium Paper Foil, 8x8 Fiberglass Scrim Reinforced (K731P)

 
 
Vapour Barrier Insulation Foil (2) View More


KFOIL Reflective Insulation / Vapor Barrier are known to be premium quality and is extensive used in various industries like Industrial Packaging, Construction Material and etc.
 


BS476 Part 6 : Fire Propagation Test This measure the amount of heat released when the product under test is burned
BS476 Part 7: Surface Spread of Flame Test Method of test to determine the classification of the surface spread of flame of products. Class 1 is the best rating
To achieve Class “0” a product must achieve Class 1 in the Part 7 test and also past Part 6 test.
Test done under this group of product is ISO 8301, MS ISO08302; ASTM C 1371; AS/NZS 4201.1; AS/NZS 4201.3; AS/NZS 1301.448s; AS/NZS 1301.423rp and TAPPI T470
 
 





99% Pure Aluminum Foil with high reflectivity (>0.98) and low emissivity (<0.02) surface
Comply with fire properties according to the standard BS476 Part 6 & 7
Reinforced with bidirectional fiberglass for better tearing resistance, higher tensile strength and assist on mechanical strength.
Special bonding layer combined with aluminum foil giving it superior Vapor Barrier and Fire Retardant properties
Suggested size:
 
 Width (m) Length (m) Optimum pallet packing
1.22 –1.25 ±1% 60 ±1% 90 Rolls
Customize size available upon request, subject to material availability & machine’s capacity




  AP2RA K450 AP2RA S450
DESCRIPTION Fire Retardant Double Sided 8 Layers Vapour Barrier Aluminum Paper Foil, 8x8 Fiberglass Scrim Reinforced Fire Retardant Double Sided 8 Layers Vapour Barrier Aluminum Paper Foil, 16x8 Fiberglass Scrim Reinforced
 
GRAMMAGE
 		 210 –230 gsm 210 –230 gsm
THICKNESS
 		 250 –360 microns 250 –360 microns
THERMAL RESISTANCE
(ISO 8301, MS ISO8302)
 		 ~ 1.375 m²K/w ~ 1.375 m²K/w
REFLECTIVITY
(ASTM C 1371)
 		 0.98 0.98
EMISSIVITY
(ASTM C 1371)
 		 0.02 0.02
RESISTANCE TO DRY LAMINATION
(AS/NZS 4201.1)
 		 No Delamination No Delamination
LAYOUT DIAGRAM
   
 


Heat insulation industrial material
HVAC duct insulation
Building wrapping
Cold room installation
Thermal tank
Wall insulation
Sauna room




 
 

AP2RA K450

AP2RA S450

  
  
Woven Foil (Double Sided) (3) View More


Woven Fabric also one of backed material for our foil insulation. Premium woven quality is being use to
increase the tensile strength for extra tear strength and puncture resistance during installation
 


99% Pure Aluminum Foil with high reflectivity (>0.98) and low emissivity (<0.02) surface (K750;K750A)
Metalized Film (high optical density) with high reflectivity (>0.75-0.95) and low emissivity (<0.05-0.25) surface (K650;K650A)
Reinforced with premium woven fabric quality to increase the mechanical product strength and durability
Suggestion size:
 

 Width (m) Length (m) Optimum pallet packing
1.22 –1.25 ±1% 60 ±1% 110 Rolls
Customize size available upon request; subject to material availability & machine’s capacity




  K650A K750A K756A
DESCRIPTION Double Sided Reflective
Metallise Woven Film (PE)		 Double Sided Reflective
Aluminium Woven Foil (PE)		 Double Sided Reflective
Aluminium Woven Foil/Film
GRAMMAGE
 		 120 – 140 gsm 120 – 140 gsm 120 – 140 gsm
THICKNESS
 		 110 – 130 micron 110 – 130 micron 110 – 130 micron
TENSILE STRENGHT
(ASTM D 828)
 		 MD: 15 –17 kN/m
XD: 15 –17 kN/m		 MD: 11 –15 kN/m
XD: 11 –15 kN/m		 MD: 14 –18 kN/m
XD: 14 –18 kN/m
CORROSION
(95% RH @50⁰C,30 DAYS)
 		 None None None
TEAR RESISTANCE
 		 Excellent Excellent Excellent
VAPOUR BARRIER
 		 Excellent Good Excellent
WATER RESISTANCE
 		 No Delamination No Delamination No Delamination
LAYOUT DIAGRAM  

 



Building wrapping
Concrete / Clay tile roofing
Metal Roofing
Wall insulation
Foil facing for bulk insulation




 

DOUBLE SIDED REFLECTIVE METALIZED WOVEN FILM (K650A)

DOUBLE SIDED REFLECTIVE ALUMINIUM WOVEN FILM (K750A)

K756A

 
 
Woven Foil (Single Sided) (2) View More


Premium woven quality is being use to increase the tensile strength for extra tear strength and puncture resistance during installation.
 


99% Pure Aluminum Foil with high reflectivity (>0.98) and low emissivity (<0.02) surface (K740A)
Metalized Film (high optical density)with high reflectivity (>0.75-0.95) and low emissivity (<0.05-0.25) surface (K640A)
Reinforced with premium woven fabric quality to increase the mechanical product strength and durability
Suggestion size:
 
 Width (m) Length (m) Optimum pallet packing
1.22 –1.25 ±1% 60 ±1% 120 Rolls
Customize size available upon request; subject to material availability & machine’s capacity




  K640A K740A
DESCRIPTION Single Sided Reflective Metallise Woven Film (PE) Single Sided Reflective Aluminium Woven Film (PE)
GRAMMAGE
 		 85 – 95 gsm 85 – 95 gsm
THICKNESS
 		 85 – 105 micron 85 – 105 micron
TENSILE STRENGHT
(ASTM D 828)
 		 MD: 13 –15 kN/m
XD: 13 –15 kN/m		 MD: 10 –13 kN/m
XD:10 –13 kN/m
CORROSION
(95% RH @50⁰C,30 DAYS)
 		 None None
TEAR RESISTANCE
 		 Excellent Excellent
VAPOUR BARRIER
 		 Excellent Good
WATER RESISTANCE
 		 No Delamination No Delamination
LAYOUT DIAGRAM    
 


Building wrapping
Concrete / Clay tile roofing
Metal Roofing
Wall insulation
Foil facing for bulk insulation




 
 

Single Sided Reflective Metalize Woven Film (K640A)

Single Sided Reflective Aluminium Woven Foil (K740A)

  
  

© 2017 - 2024 K Innovation Sdn Bhd      201201010786 (984306-K) | Privacy Policy        Visitors: 182885
Powered by NEWPAGES
Switch to Mobile Version